FATC3 Software Update (Fiat)
This product requires: TrueCode Smart
This software works with the following vehicles:
- Fiat Punto (2006-2011) (Black BCM)
- Fiat Punto (2011-2014) (Grey BCM)
- Fiat 500 (2007-2011)
- Fiat 500 (2011-2014)
- Fiat Doblo (2010-2014)
- Fiat Fiorino (<2014)
- Citroen Nemo (<2014)
- Peugeot Bipper (<2014)
- Opel Combo (<2014)
Using FATC3, there is now no need to remove the BCM and read the EEPROM memory device from these vehicles. All the necessary information required to obtain the pincode, and create a dealer key can be read via OBD, very easily, in just seconds, using TrueCode Smart.
FATC3 allows you to fully read the 93c86 EEPROM memory inside the BCM – all via the OBD socket in just 45s or so. The file is then saved to your PC. This is the exact same file you would get if you had opened the BCM and read the EEPROM manually. Only, this process is completed in approximately 45s and carries no risk of damage to the device or your fingers.
You can then load this EEPROM file into Tango/Miraclone/TMPro2/ZedBull etc. etc. in order to generate a ‘dealer precoded’ standard or remote control key. In addition, you can also use this file to create a fully working standard key onto a TPX4 type transponder – with no further programming required. This is extremely useful for Fiat, due to the way that the key programming system permanently deletes unavailable keys. (Using that method, you can leave the existing keys still working in the case that the customer may find them again.)
Once you’ve precoded a key/remote, it can then be programmed into the vehicle via OBD, using our FATC2 software.